How to Maintain Pick and Place Machine Nozzles | SMTFullLine Maintenance Guide
How to Maintain Pick and Place Machine Nozzles
Nozzles are the most frequently worn parts on any pick‑and‑place machine. Learning how to maintain pick and place machine nozzles will reduce pickup errors and placement shifts. SMTFullLine provides cleaning tools and replacement nozzles.
Daily Maintenance
Visual inspection – Look for cracks, chips, or deformed tips.
Wipe exterior – Use lint‑free cloth with isopropyl alcohol.
Check vacuum – Place nozzle on a flat surface; machine should register vacuum >‑80 kPa.
Weekly/Deep Cleaning
Remove nozzles from the head using tweezers.
Soak in alcohol for 5‑10 minutes.
Use cleaning wire (0.1‑0.3mm) to push out dried paste from the tip.
Blow compressed air (low pressure) to remove loosened debris.
Inspect under magnification – Repeat if needed.
When to Replace
Nozzle tip is visibly worn or enlarged.
Repeated pickup failures after cleaning.
Drop in vacuum reading below specification.
SMTFullLine’s Nozzle Care Products
We stock complete nozzle sets for all popular pick‑and‑place machines. We also sell ultrasonic cleaners, cleaning wires, and storage cases to extend nozzle life.
Keep your nozzles performing like new.
Shop maintenance tools at SMTFullLine.com.
E-mail*
*